Job Description :
Job Title: Implementation Specialist (Multi-Vendor Switches - Cisco)
Location: Santa Clara, CA / Edison, NJ (Onsite)
Job Description
  • Physical installation of each in accordance with specific Customer environmental needs to ensure that the device is ready for implementation in the Customer s IP network environment.
  • Firmware upgrades to vendor recommended version(s), as needed
  • Configuration of the management interface, as needed
  • Perform the installation tasks.
  • Unpack and inspect all hardware prior to installation.
  • Mount any necessary rack related hardware.
  • Mount the switch into the rack.
  • Install and route power cables.
  • Label and connect network cable to switch management port.
  • Install all optional cards/modules into the switch.
  • Power on equipment and check for hardware fault indicators.
  • Update switch operating system, as needed.
  • Configure remote access for the switch, as needed
  • For managed switches only, assign an IP address, mask and gateway information to the management port of the switch.
  • Verify if remote access if working for the designated IP address.
  • Do steps 1 to 11 for the Networking Firewall
  • Configure firewall management - plan, execute the firewall initial wizard and assign an IP address, netmask, gateway, username and password.
  • Using a customer provided cable, connect switch/Firewall management port to the existing network.
  • Upon completion of the installation, shall document any deviations made from the original Design Documentation

Kamal
Technical Recruiter
Tanisha Systems Inc



Client : Tanisha Systems

             

Similar Jobs you may be interested in ..